This should be allowed by the operating system.
In the previous era, we enjoyed the richness of information, but the sharing technology was insufficient, so we took care of it through indirect routes such as PD boxes and igloo pds.The time I lived was between the two, the time of the reminder and the time of the torrent or drive/cloud. They usually used […]

In the previous era, we enjoyed the richness of information, but the sharing technology was insufficient, so we took care of it through indirect routes such as PD boxes and igloo pds.
The time I lived was between the two, the time of the reminder and the time of the torrent or drive/cloud. They usually used big pies or berryz

Recently, there was nothing to write about and made memories, so I put on a berry. According to what we saw while installing, the producer received a warning from Gosonga and stopped the development server. That's too bad.
So I check the server port like before, but I can't do it no matter how much. To fix this, write down what you've done and what you've done here. Because the information must be accumulated.

  1. Specify the port to use in the program.
    The server port is set to 80 by default when checked in the Berries configuration.
    Let's change this port to a different port because it sometimes gets twisted by sharing it with Windows.
    I used the 8888 instead of the 80s. Check.
  2. Open the port on the router or modem.
    In 2021 modern society, a common router would be used.
    Probably in the form of an external-modem-sharing machine-PC.
    You are an External - Modem - Shared Machine
    It was a PC.
    In my case, going through a PC was a modem, so I need to see the modem settings.
    When you run CMD on a run from the R-Win key, the console window appears.
    Use IPCONFIG to verify the address. Let's remember ipv4 and gateway.
    It is 192.168.## because the modem is in use.

    He entered modem settings with a gateway written in the address bar.
    Let's remember the external IP in the WAN.
    In the Port Forwarding Menu, local IP addresses have my IPv4 address:
    The protocol is TCP/UDP (both because I didn't know),
    The port contained 8888.
    The range only records the first digit when writing a single port. The back seat is empty, so it's okay.
    Additional
    It is convenient to open all ports called DMZ, but there is a security risk.
    Port forwarding is recommended because it only opens the setup port.

  3. The operating system should allow this.
    Open TCP port 80 in Windows Firewall [McNeel Wiki]
    Open TCP port 80 in Windows Firewall Product: Zoo Summary: Provides instructions for opening TCP port 80 in Windows Firewall. Overview Zoo 5 connects to the Rhino 5 client via TCP port 80 (HTTP). After installing Zoo 5, ensure that TCP port 80 is open for both incoming and outgoing communications from the firewall software running on the Zoo server computer. Guidance: In most firewall software, TCP port 80 is open to outgoing communications by default. So Rhino Works…
    I referred to the above. Let's just change the name/description/port number accordingly.
    I fixed it to Berriesport/88888.
    Oh, I can do it even though I only did TCP. TCP, please.

    3-1. Verify Port p2p사이트 Connectivity
    When using the netstat -ano | find "LISTEN" command for promports
    Here comes the list of open ports.
    Let's check if there is a 0.0.0.0:(port number).
    I checked 0.0.0.0:8888.
    3-2.
    When I checked, I could also see the PID (process ID) connected to the port above.
    Therefore, the process of using port 8888 is 10932 times.
    Turn on the Task Manager to see the dust in this process.
    The Processes tab includes names, CPU usage, and so on.
    If you right click here, you can also see PID information in a new column.
    I checked and found that process 10932 was not turned off earlier.

  4. Veriz Port Check
    Turn on the configuration in Breeze and check port 8888.
    Failed… I'm sorry.
    After a quick search, the Veriz development server mentioned above must be checking if it's connected.
    No wonder the developer has RUN, so neither [resolving] nor [checking] the server problem.
    Then how do we check? You have to go in person.
  5. Final confirmation
    Smartphone is turned on to access external IP: (port number) with mobile data
    When using Wi-Fi, it is recognized as an internal network in the same modem and cannot be properly verified. Only by accessing mobile data, which is an external network, can a situation be created that is the same as an external connection.
    If you don't use the port number, what you did above is completely meaningless.
    Security prevents access from the external network to the internal network, one of which we just opened. You can access it only if you go that way with the port number.

    If you followed well, you would have succeeded in accessing mobile data even if you failed to check.
    Then you can access the same way if you turn on any Wi-Fi outside.

    It's half past a hour since I've been writing "Galbergines" for a long time.
    I'm gonna put a picture of it and fix it later. I should go to sleep.

답글 남기기

이메일 주소를 발행하지 않을 것입니다. 필수 항목은 *(으)로 표시합니다